Site Logo 　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　　English
    
科研成果
论文成果

近年来发表论文

发布时间：2019-06-04    作者：    来源：     浏览次数：


  1. Lei Zhang, Wanlin Wang, “Growth Mechanism and Structure Evolution during Nucleation of Calcium Borosilicate Crystal in Cao-SiO2-B2O3 Based Fluorine-Free Mold Flux”, ISIJ Int., Vol. 59, No.6, pp.1042-1049, 2019

  2. Chenyang Zhu, Wanlin Wang, Jie Zeng, Cheng Lu, Lejun Zhou, Jiang Chang, “Interactive Relationship between the Superheat, Interfacial Heat Transfer, Deposited Film and Microstructure in Strip Casting of Duplex Stainless Steel”, ISIJ Int. Vol.59, No. 5, pp. 880-888, 2019

  3. Cheng Lu, Wanlin Wang, Jie Zeng, Chenyang Zhu, Jiang Chang, “Effect of Naturally Deposited Film on the Sub-rapid Solidification of Medium Manganese Steel by Suing Droplet Solidification Technique”, Metallurgical Material Transactions B, Vol.50, No.1, pp.77-85, 2019

  4. Chenyang Zhu, Wanlin Wang, Cheng Lu, “Characterization of Cermet Coatings and its Effect on the Responding Heat Transfer Performance in Strip Casting Process”, Journal of Alloys and Compounds, Vol.770, pp. 631-639, 2019

  5. Guoming Ying, Wanlin Wang, Haihui Zhang, Jie Zeng, Lejun Zhou, “Influence of Electropulsing Treatment on the Solidification and Heat Transfer Behavior of Mold flux” ISIJ Int. Vol.59, No.3, pp. 456-464, 2019

  6. Peisheng Lyu, Wanlin Wang,* “State of the Art in High-temperature Mold Simulator Study of Initial Solidification in Continuous-Casting Mold”, La Metallurgia Italiana, Vol.13, No.1, pp. 56-67, 2019

  7. Wanlin Wang, Chenyang Zhu, Cheng Lu, Lejun Zhou*, Jie Yu, “Study of the Heat Transfer Behavior and Naturally Deposited Film in Trip Casting by Using Droplet Solidification Technique”, Metallurgical and Materials Transactions A, Vol.49, No.11, pp 5524–5534, 2018.

  8. Lejun Zhou, Huan Li, Wanlin Wang*, Jiang Chang, “Nonisothermal Crystallization Kinetics of Glassy Mold Fluxes”, Metallurgical Material Transactions B, Vol.49, No.6, pp.3019-3029, 2018

  9. Lejun Zhou, Huan Li, Wanlin Wang*, Dan Xiao, Lei Zhang, Jie Yu, “Effect of Li2O on the Behavior of Melting, Crystallization, and Structure for CaO-Al2O3-Based Mold Fluxes”, Metallurgical Materials Transactions B, Vol. 49, no.5, pp.2232-2240, 2018

  10. Wanlin Wang, Peisheng Lyu, Lejun Zhou*, Huan Li, Tongsheng Zhang, “High-Temperture Properties of Mold Flux Observed and Measured in Situ by Single/Double Hot-Thermocouple Technique”, JOM, Vol. 70, No.7, pp.1248-1255, 2018

  11. Wanlin Wang, Jie Yu, Lejun Zhou*, Zhaoyang Wu and Huan Li, “Optimization of Mold Flux for the Continuous Casting of Cr-Contained Steels”, Metallurgical Materials Transactions B, Vol. 49, No.4, pp. 1580-1587, 2018

  12. Wanlin Wang, Zhican Luo and Haihui Zhang*, “Effect of Slag-Steel Reaction on the Initial Solicitation of Molten Steel during Continuous Casing”, Metallurgical Materials Transactions B, Vol. 49, no.3, pp.1034-1045, 2018

  13. Wanlin Wang, Xukai Long, Haihui Zhang*, Peisheng Lyu, “Mold Simulator Study of Effect of Mold Oscillation Frequency on Heat Transfer and Lubrication of Mold Flux”, ISIJ Int., Vol.58, No.9, pp.1695-1704, 2018

  14. Wanlin Wang, Dexiang Cai, Lei Zhang*, “ A Review of Fluorine-free Mold Flux Development”, ISIJ Int., Vol.58, No.11, pp. 1957-1964, 2018

  15. Zhaoyang Wu, Z. Jiang, X. Fan, Lejun Zhou, Wanlin Wang*, Kun Xu, “Facile Synthesis of Fe-6.5 Wt% Si/SiO2 Soft Magnetic Composites as an Efficient Soft Magnetic Composite Material at Medium and High Frequencies”, Journal of Alloys and Compounds, Vol. 742, pp. 90-98, 2018

  16. Haihui Zhang, Huihui Xiong, Dezhi Wang, Wanlin Wang, “Mechanism of NbC Heterogeneous Nucleation On TiN in Micro-alloyed Steel: A First-Principle Study”, Computational Materials Science, Vol.146, pp. 126-133, 2018

  17. Peisheng Lyu, Wanlin Wang*, Xukai Long, Kaixuan Zhang, Erzhuo Gao and Rongshan Qin, “Study of the Effect of Mold Corner Shape on the Initial Solidification Behavior of Molten Steel Using Mold Simulator”, Metallurgical Materials Transactions B, Vol. 49, no.1, pp.78-88, 2018

  18. Longyun Xu, Jian Yang, Ruizhi Wang, Wanlin Wang, Yunan Wang, “Effect of Mg Addition on Formation of Intra-granular Acicular Ferrite in Heat-affected Zone of Steel Plate after High-heat-input Welding”, Journal of Iron and Steel Research International, Vol.25, no.4, pp. 433-441, 2018

  19. Lei Zhang, Wanlin Wang*, Lejun Zhou, “Current State Art of Hot Thermocouple Technology-Novel Way for the Study of Mold flux High-Temperature Properties”, 147th Annual Meeting & Exhibition Supplemental Proceedings, pp.201-209, Phoenix, AZ, 2018.

  20. Chenyang Zhu, Wanlin Wang*, Cheng Lu, “Current State of Art of Heat Transfer Issues in Strip Casting”, 2018 International Symposium on Thin Slab Casting and Direct Rolling (TSCR), pp. 305-311, Wuhan, China, 2018.

  21. Peisheng Lyu, Wanlin Wang*, "State of the Art in High-temperature Mold Simulator Study of Initial Solidification In Continuous-casting Mold",7th International Congress on Science and Technology of Steelmaking (ICS 2018), No. 212, Venice, Italy, 2018

  22. Wanlin Wang, Jie Yu, Lejun Zhou, “Investigation of High-temperature Properties of the Mold Flux for Casting Cr-contained Steel”, The 7th international congress on science and technology of steelmaking (ICS 2018), No. 146, Venice, Italy, 2018.

  23. Guoming Ying, Wanlin Wang*, “Influence of electropulsing treatment on the initial solidification of molten steel during the process of continuous casting”, 7th International Congress on Science and Technology of Steelmaking (ICS 2018), No. 211, Venice, Italy, 2018

  24. Chenyang Zhu, Wanlin Wang*, “Research methods of sub-rapid solidification and its related heat transfer phenomena in strip casting”, The 7th International Congress on Science and Technology of Steelmaking (ICS 2018), No. 210. Venice, Italy, 2018.

  25. Lejun Zhou, Zhihang Pan, Wanlin Wang, “An Environmental-friendly CaO-SiO2-B2O3 Based Fluorine Free Mold Flux for the Continuous Casting Process”. 2018 China Symposium on Sustainable Steelmaking Technology (CSST2018), pp.25-26, Tianjin, China, 2018.

  26. Chenyang Zhu, Wanlin Wang*, and Cheng Lu, “Key Issues of the Interfacial Heat Transfer and Deposited Films in Strip Casting”, The 1st China Symposium on Sustainable Steelmaking Technology (CSST 2018), pp.406-410, Tianjin, China, 2018.

  27. Lejun Zhou, Junyu Chen, Huan Li, Wanlin Wang, “Crystallization kinetics of mold fluxes for high-al steel during non-isothermal process”, The 7th Baosteel Biennial Academic Conference, (BAC2018), pp.30-31, Shanghai, China, 2018.

  28. Tongsheng Zhang, Lejun Zhou, Daoyuan Huang, Wanlin Wang, Weiguang Tian, Jialin Xu, “Effect Ca Addition on the Behavior of the Inclusions in Ti-Bearing Al-Deoxidized Melts”, Proceedings of 2018 China Symposium on Sustainable Steelmaking Technology (CSST2018), pp. 530-534, Tianjin, China, 2018.

  29. Lejun Zhou, Huan Li, Wanlin Wang＊, Zhaoyang Wu, Jie Yu, Senlin Xie, “Non-isothermal Crystallization Kinetics of Mold Flux for Casting of High-aluminum Steels” Metallurgical Materials Transactions B, Vol. 48, No. 6, pp. 2949-2960, 2017.

  30. Erzhuo Gao, Wanlin Wang, Lei Zhang, “Effect of Alkaline Earth Metal Oxides on the Viscosity and Structure of the CaO-Al2O3 based Mold Flux for Casting High-Al Steels, Journal of Non-Crystal Solids, Vol.473, pp. 79-86, 2017.

  31. Lejun Zhou, Wanlin Wang, Chao Xu, Chen Zhang, “An Investigation of the Mold-Flux Performance for the Casting of Cr12MoV Steel Using a Mold Simulator Technique”, Metallurgical and Materials Transactions B, Vol. 48, No.4, pp.2017-2026, 2017

  32. Longyun Xu, Jian Yang, Ruizhi Wang, Wanlin Wang, Zhongmin Ren, “Effect of Welding Heat Input on Microstructure and Toughness of Heated-Affected Zone in Steel Plate with Mg Deoxidation”, Steel Research International, Vol. 88, Issue: 12, Article number: UNSP 1700157, 2017.

  33. Lejun Zhou, Huan Li, Wanlin Wang, Il Sohn, “Effect of ZrO2 on the Melting, Viscosity and Crystallization Behaviors of Fluorine-Free Mold Flux for Casting Medium Carbon Steels” Steel Research International., Vol.88, Issue 9, Article number: UNSP 1600459, 2017 (51528402)

  34. Lejun Zhou, Jingwen Li, Wanlin Wang, Il Sohn, “Wetting Behavior of Mold Flux Droplet on Steel Substrate With or Without Interfacial Reaction”, Metallurgical and Materials Transactions B, Vol.48, No.4, pp.1943-1950, 2017

  35. Wanlin Wang, Chenyang Zhu, Lejun Zhou, “Initial Solidification and Its Related Het Transfer Phenomena in the Continuous Casting Mold”, Steel Research International, Vol.88, Issue 10, Article number: UNSP 1600488, 2017

  36. Lei Zhang, Wanlin Wang, Senlin Xie, Kaixuan Zhang, Il Sohn, “Effect of Basicity and B2O3 on the Viscosity and Structure of Fluorine-Free Mold Flux”, Journal of Non-Crystalline Solids, Vol. 460, pp. 113-118, 2017.

  37. Haihui Zhang, Wanlin Wang, “Mold Simulator Study of Heat Transfer Phenomenon During the Initial Solidification in Continuous Casting Mold”, Metallurgical and Materials Transactions B, Vol. 48, No. 2, pp.779-793, 2017

  38. Erzhuo Gao, Ge Zou, Wanlin Wang, Fanjun Ma, Xuechao Luo, “Undercooling and Wettability Behavior of Interstitial-Free Steel On TiN, Al2O3 and MgAl2O4 Under Controlled Oxygen Partial Pressure”, Metallurgical and Materials Transactions B, Vol. 48, No. 2, pp.1014-1023, 2017

  39. Lejun Zhou, Wanlin Wang, “ Study of the Viscosity of Mold Flux Based on the Vogel-Fulcher-Tammann(VFT) Model”, Metallurgical and Materials Transactions B, Vol. 48, No. 1, pp.220-226, 2017

  40. Peisheng Lyu, Wanlin Wang, Haihui Zhang, “Mold Simulator Study on the Initial Solidification of Molten Steel Near the Corner of Continuous Casting Mold”, Metallurgical and Materials Transactions B, Vol. 48, No. 1, pp.247-259, 2017

  41. Chenyang Zhu, Wanlin Wang, Cheng Lu, “Modeling of the Initial Solidification and Naturally Deposited Films in Strip Casting Using Droplet Solidification Technique”, 7th International Conference on Modeling and Simulation of Metallurgical Processes in Steelmaking, pp.234-237, Qingdao, China, 2017

  42. Chenyang Zhu, Wanlin Wang, Cheng Lu,“A Novel Droplet Solidification Technique for studying the Interfacial Heat Transfer and Deposited Films in Strip casting”, The 9th Korea-China Joint Symposium on Advanced Steel Technology, pp.71-75, Jeju, Korea, 2017

  43. 朱晨阳，王万林，路程，“新型熔滴凝固技术对薄带连铸中界面传热及沉积膜的研究”，第十一届中国钢铁年会，pp.1-5 (1661), 中国北京， 2017

  44. Peisheng Lyu , Wanlin Wang. "Perspectives of study on Initial Solidification Phenomena in Continuous Casting Mold"，3rd International Conference on Science and Technology of Ironmaking & Steelmaking，pp.191-194, Kanpur, India, 2017

  45. 吕培生，王万林，钱海瑞，“连铸结晶器角部附近钢液初始凝固的热模拟研究”，第十一届中国钢铁年会，pp. 1-10 (1569), 中国北京，2017

  46. 吕培生，王万林，钱海瑞，张玉峰，徐佳林，刘刚，唐剑明，“200系不锈钢保护渣的优化研究”，第四届全国连铸工艺技术学术年会，pp.31-39, 中国太原， 2017

  47. 张磊、王万林， “先进高强度钢连铸保护渣的发展与展望”，炼钢，Vol.33, no.3, pp.20-24, 2017

  48. 张磊，王万林，Sohn IL, “连铸结晶器无氟保护渣熔化及传热性能的研究”， 第十一届中国钢铁年会，pp. 1-6 (10347), 中国北京，2017.，

  49. 路程，王万林，邹格，高尔卓，“IF钢在多晶氧化铝基底上异相行核行为的研究”，第十一届中国钢铁年会，pp.1-7 (文章号10348), 中国北京，2017

  50. 龙旭凯，王万林，张海辉， “结晶器振动频率对铜模与坯壳之间传热现象的影响”， 第十一届中国钢铁年会，pp.1-7 (文章号1608)，中国北京，2017

  51. 李欢，王万林，周乐君，“连铸结晶器保护渣非等温结晶动力学的研究”， 第十一届中国钢铁年会，pp.1-7 (文章号10345)，中国北京，2017

  52. 张凯旋、王万林,“碱度和B2O3对无氟渣熔体粘度及熔化行为影响机理的研究”,第四届全国连铸工艺技术学术年会,pp.17-23, 2017

  53. 余杰，王万林，周乐君，“浅谈镍铁渣综合回收利用的方法”，第十一届中国钢铁年会，pp.1-5 (文章号10346),中国北京，2017

  54. 余杰，王万林，肖丹，朱晨阳，“MgO和BaO对CaO-Al2O3系保护渣熔化与结晶行为的影响”，第四届全国连铸工艺技术学术年会,pp.24-31,中国太原，2017

  55. 路程，王万林，朱晨阳，“薄带连铸中自然沉积氧化膜对界面传热与润湿情况的影响”，第四届全国连铸工艺技术学术年会，pp.11-16，中国太原，2017

  56. 徐龙云, 杨健, 王睿之, 王万林,“Mg脱氧钢中夹杂物对晶内针状铁素体形成的影响”, 第十一届中国钢铁年会, pp. 1-6 (文章号10105), 北京, 中国, 2017

  57. 徐龙云，杨健，王睿之，王万林,“Mg含量对焊接热影响区夹杂物及组织的影响”, 炼钢, Vol.33, no.5, pp.19-23, 2017

  58. Lejun Zhou, Wanlin Wang, “The Development of CaO-SiO2-B2O3-based Fluorine-Free Mold Flux for a Continuous Casting Process”, Metallurgical and Materials Transactions E, Vol. 3E, No.3, pp.139-144, 2016

  59. Wanlin Wang, Jinwen Li, Lejun Zhou, and Jian Yang, “Effect of Mn Content on the Interfacial Property of Mold Flux and Steel”, Metal Materials International, Vol. 22, No.4, pp.700-706, 2016

  60. Xuechao Luo, Wanlin Wang and Fanjun Ma, “Degree of Undercooling and Wettability Behavior of Liquid Steel on Single-crystal Al2O3 and MgO Substrate Under Controlled Oxygen Partial Pressure”, ISIJ International, Vol.56, No.8, pp. 1333-1341, 2016

  61. Yexin Zhang, Wanlin Wang and Haihui Zhang, “Development of a Mold Cracking Simulator: The Study of Breakout and Crack Formation in Continuous Casting Mold”, Metallurgical and Materials Transactions B, Vol. 47, no.4, pp.2244-2252, 2016

  62. Lejun Zhou, Wanglin Wang, and Kechao Zhou, “ A Study of the Heat Transfer Behavior of Mold Fluxes with Different Amounts of Al2O3”, Metals, Vol. 6, No. 6, 139, pp.1-14, 2016 (51504294,51322405)

  63. Longyun Xu, Jian Yang, Ruizhi Wang, Yunan Wang and Wanlin Wang, “ Effect of Mg Content on the Microstructure and Toughness of Heat Affected Zone of Steel Plate after High Heat Input Welding”, Metallurgical and Materials Transactions A, Vol.47A, No.7, pp. 3354-3364, 2016

  64. Lejun Zhou, Wanlin Wang, “Application of Non-Arrhenius Models to the Viscosity of Mold Flux”, Metallurgical and Materials Transactions B, Vol. 47, No.3, pp. 1548-1552, 2016 (51504294, 51322405)

  65. Senlin Xie, Wanlin Wang, Zhican Luo and Daoyuan Huang, “Mass Transfer Behavior of Phosphorus from the Liquid Slag Phase to Solid 2CaO.SiO2 in the Multiphase Dephosphorization Slag”, Metallurgical and Materials Transactions B, Vol. 47, No.3, pp. 1583-1593, 2016 (14jj1005)

  66. Xiulin Xin, Jian Yang, Ruizhi Wang and Wanlin Wang, “Effects of Al Content on Non-Metallic Inclusion Evolution in Fe-16Mn-xAl-0.6C High Mn TWIP Steel”, Ironmaking & Steelmaking, Vol. 43, Issue 3, pp. 234-242, 2016

  67. Wanlin Wang, Xiong Yan, Jejun Zhou, Senlin Xie and Daoyuan Huang, “ Influence of Basicity and Li2O on the Properties of Fluorine-Free Mold Flux for the Casting of Medium Carbon Steels”, Metallurgical and Materials Transactions B, Vol. 47, No. 2, pp. 963-973, 2016

  68. Haihui Zhang, Wanlin Wang, “Mold Simulator Study of the Initial Solidification of Molten Steel in Continuous Casting Mold: Part II. Effects of Mold Oscillation and Mold Level Fluctuation”, Metallurgical and Materials Transactions B, Vol. 47, No. 2, pp. 920-931, 2016

  69. Wanlin Wang, Boxun Lun and Dan Xiao, “A Review of Mold Flux Development for the Casting of High-Al Steels”, Metallurgical and Materials Transactions B, Vol. 47, No. 1, pp. 384-389, 2016 2

  70. Senlin Xie, Wanlin Wang, “Crystallization Kinetics Study of the (2CaO.SiO2-3CaO.P2O5) Solid Solution in the Multiphase Dephosphorization Flux”, Steel Research International, Vol. 87, No. 3, pp.376-385, 2016

  71. Kai Li, Hosni Idrissi, Gang Sha, Min Song, Jiangbo Lu, Hui Shi, Wanlin wang, Simon p. Ringer, Yong Du, Dominique Schryvers, “Quantitative Measurement for the Microstructural Parameters of Nano-precipittates in Al-Mg_si-Cu Alloys”, Materials Characterization, Vol. 118, No.8, pp.352-362, 2016

  72. Wanlin Wang, Chenyang Zhu, Yexin Zhang, “Study of Breakout and Crack Formation in Continuous casting Mold through Mold Cracking Simulator”, Proceedings of The 8th China-Korea Joint Symposium on Advanced Steel Technology, pp.35-43, Chongqing, China, 2016

  73. Peisheng Lyu, Wanlin Wang, “An Investigation on Initial Solidification of Molten Steel Near the Mold Corner by Using Mold Simulator”, Proceedings of The 14th Japan-China Symposium on Science and Technology of Iron and Steel, pp.206-215, Sendai, Japan, 2016

  74. Dan Xiao, Wanlin Wang, Boxun Lu, “Advanced Mold Flux Development for the Casting of High-Al Steels”, Proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts, pp.263-270, Seattle, USA, 2016

  75. Haihui Zhang, Wanlin Wang*, Fanjun Ma and Lejun Zhou, “Mold Simulator Study of the Initial Solidification of Molten Steel in Continuous Casting Mold. Part I: Experiment Process and Measurement”, Metallurgical and Materials Transactions B, Vol. 46, No. 5, pp. 2361-2373, 2015

  76. Senlin Xie, Wanlin Wang*, “Isothermal Crystallization Study of (2CaO-SiO2-3CaO-P2O5) Solid Solution in the 45 mass% CaO-30% mass% SiO2-20mass%FeOt-5 mass% P2O5 System at 1623 K”, Steel Research International, Vol. 86, No. 12, pp. 1622-1627, 2015

  77. Jian Yang, Longyun Xu, Kai Zhu, Ruizhi Wang, Lejun Zhou and Wanlin Wang, “Improvement of HAZ Toughness of Steel Plate for High Heat Input Welding by Inclusion Control with Mg Deoxidation” Steel Research International, Vol. 86, No. 6, pp. 619-625, 2015

  78. Haihui Zhang, Wanlin Wang, and Lejun Zhou, “Calculation of Heat Flux Across the Hot Surface of Continuous Casting Mold Through Two-Dimensional Inverse Heat Conduction Problem”, Metallurgical and Materials Transactions B, Vol. 46, No. 5, pp. 2137-2152, 2015

  79. Lejun Zhou, Wanlin Wang and Kechao Zhou, “Viscosity and Crystallization Behavior of F-Free Mold Flux for Casting Medium Carbon Steels”, ISIJ, Vol.55, No.9, pp.1916-1924, 2015

  80. Lejun Zhou, Wanlin Wang and Kechao Zhou, “Effect of Al2O3 on the Crystallization of Mold Flux for Casting High Al Steel”, Metallurgical and Materials Transactions E, Vol.2, No. 2, pp.99-108, 2015

  81. Yongzhen Liu, Wanlin Wang, Fanjun Ma, Haihui Zhang, “Study of Solidification and Heat Transfer Behavior of Mold Flux Through Mold Flux Heat Transfer Simulator Technique: Part I. Development of the Technique, Metallurgical and Materials Transactions B, Vol. 46, No. 3, pp. 1419-1430, 2015

  82. Fanjun Ma, Yongzhen Liu, Wanlin Wang and Haihui Zhang, “Study of Solidification and Heat Transfer Behavior of Mold Flux Through Mold Flux Heat Transfer Simulator Technique: Part II. Effect of Mold Oscillation on Heat Transfer Behaviors, Metallurgical and Materials Transactions B, Vol. 46, No. 4, pp. 1902-1911, 2015

  83. Lejun Zhou, Wanlin Wang, Juan Wei, Kechao Zhou, “Melting and Heat Transfer Behavior of Fluorine-Free Mold Fluxes for Casting Medium Carbon Steels”, ISIJ, Vol. 55, No. 4, pp. 821-829, 2015

  84. Sung-Kwang Kim, Wanlin Wang and Youn-Bae Kang, “Modeling Surface tension of Multicomponent Liquid Steel Using Modified Quasi-chemical Model and Constrained Gibbs Energy Minimization”, Metal Materials International, Vol. 21, No. 4, pp. 765-774, 2015

  85. Dan Xiao, Wanlin Wang, Boxun Lu, “Effects of B2O3 on the Crystallization Behavior of CaO-Al2O3- Based Mold Flux for Casting High-Al Steels, Metallurgical Materials Transactions B, Vol. 46, No.2, pp. 873-881, 2015

  86. Boxun Lu, Wanlin Wang, “Effects of Fluorine and BaO on the Crystallization Behavior of Lime-Alumina- Based Mold Flux for Casting High-Al Steels, Metallurgical Materials Transactions B, Vol. 46, No.2, pp. 852-862, 2015

  87. Chao Xu, Wanlin Wang, Lejun Zhou, Senlin Xie, Chen Zhang, “The effects of Cr2O3 on the Melting, Viscosity, Heat transfer and Crystallization Behaviors of Mold Flux Used for the Casting of Cr-Bearing Alloy Steels”, Metallurgical Materials Transactions B, Vol. 46, No.2, pp. 882-892, 2015

  88. Lejun Zhou, Wanlin Wang, “Influence of the Initial Solidification Controlling on the Energy Saving during Continuous Casting”, Energy Technology 2015: Carbon Dioxide Management and Other Technologies, pp. 37-45, 2015

  89. Xiaoguang Hou, Engang Wang, Xiujie Xu, Anyuan Deng, Wanlin Wang, “Effect of Thermal Barrier Coating above Mold Meniscus on Mold Heat Transfer and Oscillation Mark Morphology of Strands”, Acta Metallurgica Sinica, Vol. 51, No. 9, pp. 1145-1152, 2015

  90. Lejun Zhou, Wanlin Wang, Boxun Lu, Guanghua Wen, Jian Yang “Effect of Basicity and B2O3 on Viscosity, Melting and Crystallization Behaviors of Low Fluorine Mold Fluxes for Casting Medium Carbon Steels”, Metal Materials International, Vol. 21, No. 1, pp. 126-133, 2015

  91. Haihui Zhang, Wanlin Wang “Initial Solidification of Molten Steel-What Is Happened in the mold”, Proceedings of Asia Steel International Conference, Yokohama, Japan, pp. 60-61, 2015

  92. Haihui Zhang, Wanlin Wang, Lejun Zhou, “Mold Simulator Technique-A Key way to Study Initial Solidification of Molten Steel During Continuous Casting”, Proceedings of The 6th International Congress on the Science and Technology of Steelmaking, Beijing, China, pp. 2015.

  93. Senlin Xie, Wanlin Wang, “Simulate the Transfer Behavior of Phosphorous in the Multi-phase Slag Through the Single Hot Thermocouple Technique”, Proceedings of the 6th Baosteel International Academic Conference, Shanghai, China, pp. 2015

  94. 张业欣，王万林(*),铸造高温合金与纯净化熔炼技术发展现状,铸造高温合金与纯净化熔炼技术发展现状,2015.8.28,(04): 28~3235

  95. 侯晓光，王恩刚，许秀杰，邓安元，王万林,弯月面热障涂层方法对结晶器传热及铸坯振痕形貌的影响,金属学报,2015.9.11,(09): 1145~1152

  96. 罗薛超，王万林(*),过热度、氧分压对钢液与氧化铝之间过冷度的影响,金属材料与冶金工程,2015.6.28,(03): 24~2631

  97. 李静文，王万林(*)，周乐君,新型IF钢连铸保护渣熔化及结晶特性研究,金属材料与冶金工程,2015.6.28,(03): 16~1923

  98. Lejun, Wanlin Wang, “Energy Saving Through the Control of Initial Solidification During Continuous Casting”, JOM, Vol. 66, No. 9, pp. 1595-1602, 2014

  99. Boxun Lu, Wanlin Wang, Kun Chen, Binbin Jiang, “Effects of Li2O and Na2O on the Crystallization Behavior of Lime-Alumina Based Mold Flux for Casting High-Al Steels”, Metallurgical and Materials Transaction B, Vol. 45B, No.4, pp. 1496-1509, 2014

  100. Huan Zhao, Wanlin Wang, Lejun Zhou, Boxun-Lu and Youn-Bae Kang, “Effects of MnO on Crystallization, Melting and Heat Transfer of Cao-Al2O3 Based Mold Flux Used for High Al-TRIP Steel Casting”, Metallurgical and Materials Transaction B, Vol. 45B, No.4, pp. 1510-1519, 2014

  101. Haihui Zhang, Wanlin Wang, Dong Zhou, “A Study for Initial Solidification of Sn-Pb Alloy during Continuous Casting: Part I The Development of the Technique”, Metallurgical and Materials Transaction B, Vol. 45B, No.3, pp. 1038-1047, 2014

  102. Dong Zhou, Wanlin Wang, Haihui Zhang, Funjun Ma, Kun Chen and Lejun Zhou,“A Study for Initial Solidification of Sn-Pb Alloy during Continuous Casting: Part II Effect of Casting Parameters on Initial Solidification and Shell Surface”, Metallurgical and Materials Transaction B, Vol. 45B, No.3, pp.1048-1056, 2014

  103. Binbin Jiang, Wanlin Wang, Il Sohn, Juan Wei, Lejun Zhou and Boxun Lu, “A Kinetic Study of the Effect of ZrO2 and CaO/Al2O3 ratios on the crystallization behavior of a CaO-Al2O3 based Slag System”, Metallurgical and Materials Transaction B, Vol. 45B, No.3, pp.1057-1067, 2014 9

  104. Haihui Zhang, Wanlin Wang, Dong Zhou, “Initial Solidification Behaviors of Medium Carbon Steels During Continuous Casting Process”, Proceedings of 8th European Continuous Casting Conference, Graz, Austria, pp. 1150-1159, 2014

  105. Lejun Zhou, Boxun Lu, Huan Zhao, and Wanlin Wang, “New Development of Mold Flux for Casting of High Aluminum Containing Steels”, Proceedings of 8th European Continuous Casting Conference, Graz, Austria, pp. 1394-1403, 2014

  106. Juan Wei, Wanlin Wang, Boxun Lu, Lejun Zhou, “Green Slag System Design during Continuous Casting”, Energy Technology 2014: Proceedings of Caron Dioxide Management and Other Technologies, TMS, San Diego, pp. 63-70, 2014

  107. Senlin Xie, Lejun Zhou, Wanlin Wang, “Distribution of P2O5 between Solid Solution and Liquid Phases in CaO-SiO2-Fe2O3 System Containing Na2O or B2O3”, Proceedings of EPD Congress 2014, TMS, San Diego, pp. 317-324, 2014

  108. Lejun Zhou, Wanlin Wang, Kechao Zhou, “The Optimization of Mold Flux for Casting Al Containing Steels”, Proceedings of 6th China-Korea Joint Symposium on Advanced Steel Technology, Nanjing, China, pp. 180-188, 2014

  109. 吴亦泉，王万林,TiN-Ca处理对EH36大线能量焊接钢HAZ组织韧性的影响,热加工工艺,2014.11.01,(23): 207~208

  110. 吴亦泉，杨健，祝凯，王睿之，周乐君，王万林,Ca含量对船板结构钢中夹杂物的影响,宝钢技术,2014.8.15,(04): 1~5

  111. 徐龙云，杨健，王睿之，祝凯，周乐君，王万林,Mg脱氧对船板结构钢中夹杂物的影响,宝钢技术,2014.6.01,(6): 1~6

  112. Senlin Xie Wanlin Wang, Yongzhen Liu and Hiroyuki Matsuura, “Effect of Na2O and B2O3 on the Distribution of P2O5 between Solid Solution and Liquid Phases Slag”, ISIJ Int., Vol. 54, No. 4, pp. 766-773, 2014

  113. Juan Wei, Wanlin Wang, Lejun Zhou, Daoyuan Huang, Huan Zhao and Fanjun Ma, “Effect of Na2O and B2O3 on the Crystallization Behavior of Low Fluorine Mold Fluxes for Casting Medium Carbon Steels”, Metallurgical and Materials Transaction B, Vol. 45B, No.2, pp. 643-652, 2014

  114. Lejun Zhou, Wanlin Wang, Rui Lui and Brian Thomas, “Computational Modeling of Temperature, Flow, and Crystallization of Mold Slag During Double Hot Thermocouple Technology Experiments”, Metallurgical and Materials Transaction B, Vol.44, No.5, pp. 1264-1279, 2013 5

  115. Boxun Lu, Wanlin Wang, Jin Li, Huan Zhao, Daoyuan Huang, “ Effects of Basicity and B2O3 on The Crystallization and Heat Transfer Behaviors of Low Fluorine Mold Flux for Casting Medium Carbon Steels”, Metallurgical and Materials Transaction B, Vol. 44, No. 2, pp. 365-377, 2013 6

  116. Lejun Zhou, Wanlin Wang, Juan Wei and Boxun Lu, “Effect of Na2O and B2O3 on Heat Transfer Behavior of Low Fluorine Mold Flux for Casting Medium Carbon Steels”, ISIJ Int., Vol. 53, No.4, pp.664-671, 2013

  117. Hyuk Kim, Hiroyuki Matsuura, Fumitaka Tsukihashi, Wanlin Wang, Dong Joon Min and Il Sohn, “Effect of Al2O3 and CaO/SiO2 on the Viscosity of Calcium-Silicate-Based Slags Containing 10 Mass pct MgO”, Metallurgical and Materials Transactions B, Vol. 44, No.1, pp.5-12 , 2013

  118. Xu Gao, Hiroyuki Matsuura, Il Sohn, Wanlin Wang, Dongjoon Min and Fumitaka Tsukihashi, “Phase Relationship of CaO-SiO2-FeO-5 mass pct P2O5 System with Oxygen Partial Pressure of 10-8 atm at 1673 and 1623 K”, Materials Transactions, Vol. 54, No.4, pp.544-552, 2013

  119. Fanjun Ma, Guanghua Wen and Wanlin Wang, “Effect of Cooling rates on the Second-phase precipitation and Proeutectoid Phase Transformation of a Nb-Ti Microalloyed Steel Slab”, Steel Research International, Vol. 84, No. 4, pp. 370-376, 2013

  120. Jing Li, Zuotai Zhang, Lili Liu, Wanlin Wang, Xidong Wang, “Influence of Basicity and TiO2 Content on the Precipitation Behavior of the Ti-Bearing Blast Furnace Slags”, ISIJ Int., Vol. 53, No. 10, pp. 1696-1703, 2013

  121. Daoyuan Huang, Danqing Yi, Jie Li, Wanlin Wang, “High Temperature Oxidation Behavior of 471 and 3555 Cemented carbides, Transactions of Materials and Heat Treatment, Vol. 34, no.2, pp. 27-31, 2013

  122. Kezhuan Gu, Wanlin Wang*, Juan Wei, Hiroyuki Matsuura, Fumitaka Tsukihashi, Il Sohn, Dong Joon Min, “Heat Transfer Phenomena across Mold Flux by Using the Inferred Emitter Technique (Vol 43, pg 1393, 2012)”, Metallurgical and Materials Transaction B, Vol. 44B, No. 2, pp.482- 482, 2013

  123. Haihui Zhang, Wanlin Wang, Dong Zhou, Funjun Ma, “Study of Initial Solidification During Continuous Casting ”, Proceedings of the fifth Baosteel Biennial Academic Conference, pp. B-187-195, Shanghai, China, 2013.

  124. Lejun Zhou, Wanlin Wang, Daoyuan Huang, Juan Wei, Jin Li, “In Situ Observation and Investigation of Mold Flux Crystallization by Using Double Hot Thermocouple Technology”, Metallurgical and Materials Transaction B, Vol. 43, No. 4, pp.925-936, 2012 6

  125. Kezhuan Gu, Wanlin Wang, Lejun Zhou, Fanjun Ma and Daoyuan Huang, “ The Effect of Basicity on the Radiative Heat Transfer and Interfacial Thermal Resistance in Continuous Casting”, Metallurgical and Materials Transaction B, Vol. 43B, No.4, pp. 937-945, 2012 4

  126. Xu Gao, Hiroyuki Matsuura, Il Sohn, Wanlin Wang, Dongjoon Min and Fumitaka Tsukihashi, “Phase Relationship of CaO-SiO2-FeO-5 mass pct P2O5 System with Low Oxygen Partial Pressure at 1673 K (1400 Co)”, Metallurgical and Materials Transaction B, Vol. 43B, No.4, pp. 694-702, 2012 3

  127. Lejun Zhou, Wanlin Wang, Fanjun Ma, Jin Li, Juan Wei, Hiroyuki, Matsuura and Fumitaka Tsukihashi, “A Kinetic Study of the Effect of the Basicity on the Mold Fluxes Crystallization”, Metallurgical and Materials Transaction B, Vol. 43B, No. 2, pp.354-362, 2012 19

  128. IL Sohn, Wanlin Wang, Hiroyuki Matsuura, Fumitaka Tsukihashi and Dongjoon Min, “ Influence of TiO2 on the Visicous Behavior of Calcium Slilcate Melts Containing 17mass% Al2O3 and 10 mass% MgO”, ISIJ International, Vol. 52, No.1, pp. 158, 2012 16

  129. Jin Li, Wanlin Wang, Juan Wei and Hiroyuki Matsuura, “A Kinetic Study of the Effect of Na2O on the Crystallization Behavior of Mold Fluxes for Casting Medium Carbon Steel”, ISIJ International, Vol. 52, No.12, pp. 2220-2228, 2012

  130. Kezhuan Gu, Wanlin Wang*, Juan Wei, Hiroyuki Matsuura, Fumitaka Tsukihashi, Il Sohn, Dong Joon Min, “Heat Transfer Phenomena across Mold Flux by Using the Inferred Emitter Technique”, Metallurgical and Materials Transaction B, Vol. 43B, No.6, pp.1393-1404, 2012 4

  131. Wanlin Wang, Lejun Zhou, Kezhuan Gu and Fanjun Ma, “Study of Basicity Impact on Mold Flux Crystallization and Radiative Heat Transfer in Continuous Casting”, Proceedings of 9th International Conference on Molten Slags, Fluxes and Salts, Beijing, China, pp.Z028 , 2012

  132. Wanlin Wang, Juan Wei, Lejun zhou and Kezhuan Gu, “Study of Mold Fluxes Crystallization and Heat Transfer by Using Double Hot Thermocouple and Inferred Emitter Technique”, Proceeding of 5th International Congress on the Science and Technology of Steelmaking, pp. 1310, 2012

  133. Wanlin Wang, kezhuan Gu, Lejun Zhou, Fanjun Ma, Il Sohn, Dongjoon Ming, Hiroyuki Matsuura and Fumitaka Tsukihashi, “Radiative Heat Transfer Behavior of Mold Fluxes for Casting Low and Middium Carbon Steel”, ISIJ International, Vol. 51, No. 11, pp. 1838, 2011 9

  134. Fanjun Ma, Guanghua Wen, P. Tang and Wanlin Wang*, “Effect of Cooling rate on the Precipitation Behavior of Carbonitride in Microalloyed Steel Slab”, Metallurgical and Materials Transaction B, Vol.42B, No.1, pp.81, 2011 4

  135. Wanlin Wang, Alan Cramb, “Study of the Effects of Top Mold surface and Solid Mold Flux Crystallization on Radiative Heat Transfer Rates in Continuous Casting”, Steel Research International, Vol. 81, No. 6, pp. 446, 2010. 7

  136. Wanlin Wang, Lejun Zhou, Kezhuan Gu, “Effect of Mold Flux Melting and Crystal Dissolution on the Radiative Heat Transfer for Continuous Casting”, Metal Materials International, Vol. 16, No. 6, pp.913, 2010 5

  137. Wanlin Wang, Kenneth Blazek, Alan W Cramb, “A Study of the Crystallization Behavior of a New Mold Flux Used in the Casting of TRIP Steels”, Metallurgical and Materials Transaction B, Vol. 39B, No. 1, pp.66, 2008.

  138. Wanlin Wang, Alan Cramb. “The Observation of Mold Flux Crystallization on Radiative Heat Transfer”, ISIJ, International, Vol. 45, no.12, p.1864-1870, 2005.

  139. Wanlin Wang, Lejun Zhou, Kezhuan Gu, “The Effect of Heat Oscillation on Mold Temperature and the Heat Flux at the Meniscus Area in Continuous Casting”, Proceedings of Richard J. Fruehan Symposium-Physical Chemistry of Sustainable Metals, Pittsburgh, PA, pp. 467, 2011.

  140. Wanlin Wang, Lejun Zhou, Kezhuan Gu, “The Effect of in-situ Dynamic Mold Flux Melting and Crystallization on Heat Transfer”, Proceedings of the fourth Baosteel Biennial Academic Conference, pp. B-95, Shanghai, China, 2010.

  141. Wanlin Wang, “The Study of Aerosol Corrosion Mechanism at Tinplate-Liquid Interface”, Proceedings of RIP-Localized Corrosion, NACE, Houston, Texas, USA, pp. 102, 2010.

  142. Wanlin Wang, Joe Rubino, “Prediction of Corrosion at Tinplate-Liquid Interface”, Proceedings of Symposium: Real-Time Corrosion Monitoring - STG, pp. 102, NACE 2009, Atlanta, GA, 2009.

  143. Wanlin Wang, Alan Cramb, “ The Effect of the Transition Metal Oxides Content of a Mold flux on the Radiation Heat Transfer Rates”, Steel Research International, Vol. 79, No. 4, pp.271, 2008.

  144. Wanlin Wang, Alan Cramb, “The Effect of In-situ Dynamic Mold Flux Crystallization on Radiative Heat Transfer”, AIST Transactions, No.1, Vol. 5, pp. 155, 2008.

  145. Wanlin Wang, “Heat Transfer Phenomena across Mold Flux to Copper Mold in Continuous Casting”, PhD thesis, Carnegie Mellon University, Pittsburgh, PA, 2007.

  146. Wanlin Wang, Jui-Hung Chien, Alan Cramb. “The Effect of Manganese Oxide and Iron Oxide Mold Flux in Continuous Casting” TMS letters, Vol.3, pp. 67, 2006.

  147. Wanlin Wang, Alan W Cramb. “A study of the Effect of Mold Flux Crystallization on Radiative Heat Transfer rate” Proceedings of the second Baosteel Biennial Academic Conference, Vol. 1, pp129-133, Shanghai, China, 2006.

  148. Wanlin Wang, “A study of the Radiative Heat Transfer rate Through Different layers in Continuous Casting”, GE Advanced Materials Center Seminar, pp. 12, Cleveland, OH, 2006.

  149. Wanlin Wang, Alan Cramb. “The Study of Mold Flux Crystallization Kinetics with Different amount of Na2O” TMS letters, Vol. 2. pp. 115, 2005.

  150. Wanlin Wang, Alan Cramb. “Model of Radiative Heat Transfer in Solid Mold Flux Phase during Continuous Casting”, Materials Science &Technology, Vol. 1, pp 33-44, 2005.

  151. Wanlin Wang, Michael L. Free and David Horsup, “Prediction and Measurement of Corrosion Inhibition of Mild Steel by Imidazoline in Brine Solutions”, Metallurgical and Materials Transaction B, 36 B, pp.335-341, 2005.

  152. Wanlin Wang, Alan Cramb. “The Observation of Mold Flux Crystallization on Radiative Heat Transfer”, ISIJ, International, Vol. 45, no.12, p.1864-1870, 2005.

  153. Wanlin Wang, Alan W. Cramb, “Elimination or Minimization of Oscillation Marks - A Path to Improved Caster Surface Quality II”, 8th AISI/DOE TRP Industry Briefing Session, MIT, MA, pp. 46, 2006.

  154. Wanlin Wang, Alan W. Cramb, “Elimination or Minimization of Oscillation Marks - A Path to Improved Caster Surface Quality I”, 7th AISI/DOE TRP Industry Briefing Session, pp. 26, Pittsburgh, PA, 2005.

  155. Wanlin Wang, Michael L. Free, Dong Yong, Ryu, “Prediction of Corrosion Inhibition Using Surfactants”, Corrosion, 2004, Vol. 60, pp. 837-844.

  156. Wanlin Wang, Alan Cramb. “The Effect of Solid Mold Flux on Radiative Heat Transfer Rates” JOM, 2004, Vol. 56, pp25.

  157. Dong Y. Ryu, Wanlin Wang and Michael L. Free, “A Comparison of Surfactant Aggregation Transition of Cetyl Pyridinium Chloride Determined by Electrochemical Quartz Crystal Microbalance, Tests Surface Tension Measurements, Corrosion Current Density Measurements, and Theoretical Methods”, Adsorption Science and Technology, Vol. 25, No. 3, pp. 876, 2004.

  158. Wanlin Wang, Michael L. Free, “Prediction and Measurement of Corrosion Inhibition of Mild Steel Using Nonionic Surfactants in Chloride Media”, Corrosion Science, Vol. 46, pp2601, 2004.

  159. Wanlin Wang, Alan W Cramb, “The Effect of Solid Mold Flux Crystallization on Radiative Heat Transfer Rates” Proceedings of TMS Annual Meeting-General Session: Temperature Treatment and Casting, pp. 456, San Francisco, CA, 2005.

  160. Wanlin Wang, “Measurement and prediction of corrosion inhibition of mild steel using surfactants”, Master Thesis, Department of Metallurgical Engineering, University of Utah, 2003.

  161. Wanlin Wang , Michael L. Free, Dong Y. Ryu, “The Application of Equations to Predict Corrosion Inhibition in Aqueous Media Based upon Surfactant Properties”, NACE International 2003, p# 03625 San Diego, CA.

  162. Wanlin Wang, Michael L. Free, “Prediction and Measurement of Mild Steel Corrosion Inhibition by Alkyl Pyridinium Chloride and Alkyl Trimethyl Ammonium Bromide Surfactants in Acidic Chloride Media”, Anti-corrosion Methods and Materials, 50, 2003, P186. 6

  163. Free, ML; Bhide, R; Wang, W; Ryu, DY; Riddle, EL, “Prediction of post-CMP Particle Removal from Copper and Tungsten Surfaces in the Presence of Surfactant as a Function of Chemical Environment, Surfactant Chain Length, and Surfactant Functional Group Parameters”, 226th National Meeting of the American-Chemical-Society, pp. 125, New York, NY, USA, 2003

  164. Free, ML; Bhide, R; Wang, W; Ryu, DY; Riddle, EL, “Prediction of Chemical Removal Rates during CMP Processes in the Presence of Surfactant as a functional Chemical Environment, Surfactant Chain Length, and Surfactant Functional Group Parameters”, 226th National Meeting of the American-Chemical-Society, pp. 138, New York, NY, USA, 2003